Photocells & Motion Sensors

This Mini PIR Sensor automatically powers on connected 12 VDC or 24 VDC LED lights when human motion is detected. The sensors will power on lights at night or during the day, and an adjustable dial allows your lights to remain on for 1, 3, 5, 8, or 10 minutes. Motion detection range is within 8 meters (26') of the PIR sensor. The single-channel sensor has a 6-Amp maximum load and operates within a 12-24 VDC range. Price for each. Features: * Infrared detection controller, adopt infrared...

This PIR Sensor automatically powers on connected 12 VDC or 24 VDC LED lights for 10 seconds when human motion is detected. Designed to save energy and prolong the life of your LED lights. Motion detection range is within 15' of the PIR sensor. The single-channel sensor has an 8-Amp maximum load and operates within a 12-24 VDC range. Price for each. Sensor Activates only in darkness Takes approximately 1 minute to adjust to environment once installed properly. Use 4 screws to mount switch...

This PIR motion sensor automatically powers on connected 12 VDC or 24 VDC LED lights when human motion is detected. The sensors will power on lights at night or during the day, and an adjustable dial allows your lights to remain on for up to 2 minutes (full clockwise turn to 10 equals 2 minutes, and a full counterclockwise turn to 1 equals 45 seconds). The single-channel sensor has a 30-Amp maximum load and operates within a 12-24 VDC range. Price for each. Features: * Adopts infrared detection...

With this LED Motion sensor stair lighting controller, you can easy DIY your own intelligent stair lighting, when you go upstairs, it will light up the lights from downstairs to upstairs,  and if you are going downstairs, it will light up the lights one by one from up to down! Run speed is adjustable, and delay time, you can easy make suitable smart-stair-way to your self!  Features: PIR sensor stair light controller with daylight sensor. 32 channels constant voltage output drive low...

These motion sensor-activated LED stair lights switch on automatically to light up your stairs when you reach the top or bottom step. Each set includes LED strip lighting in protective sleeving, a power supply, advanced motion sensors and a flexible control system, ready for quick and easy installation. Why Choose superlightleds Stair Lights ? Flexible options: • Adaptable solution for different types of stairs • Sets can be built into new constructions or existing stairs •...

Adjustable PIR switch automatically activates connected 12VDC LED lights when human motion is detected. Adjustable sensitivity and light-on time. Can be set to remain on for any period of time between 30 seconds and 9 minutes. Motion detection range is within 8 meters and 160 degrees from center of PIR sensor. Single channel - 3 Amp maximum load. 12VDC operation. Specifications Rated voltage:  DC12V /DC24V /AC110-220V (50/60Hz) /AC185-240V(50/60Hz) Operating Temperature:  -20 °C...

Adjustable PIR switch automatically activates connected 110 ~ 220V/AC or  220 ~ 240V/AC LED lights when human motion is detected. Adjustable sensitivity and light-on time. Can be set to remain on for any period of time between 30 seconds and 9 minutes. Motion detection range is within 8 meters and 160 degrees from center of PIR sensor.  Specifications Power supply voltage: 110 ~220V/AC, 220 ~ 240V/AC Power frequency: 50 ~ 60Hz Ambient Light: <3LUX to daylight illumination...

Universal Infrared Sensor automatically powers on LED Lights when sensor is activated by any object within 6" infrared detection range. Connect any 12VDC or 24VDC LED lights. Single channel - 3 amp maximum load. Male and female 5.5mm barrel power connector for connecting in-line with our CPS series Power Supplies. 3M double sided adhesive included. Specifications Amps:    3 Amps Amps Per Channel:    3 Amps/CH Channels:    1 Channel IP...

Universal Proximity Sensor automatically powers LED Lights on when the sensor is activated (not blocked or covered). When cabinet, closet, or cubbie door is closed on proximity sensor, LED lights turn off, when door opens up, lights turn on automatically. Connects 12VDC or 24VDC LED lights. Single channel - 3 amp maximum load. Male and female 5.5mm barrel power connector for connecting in-line with our CPS series Power Supplies. Proximity range is within 6" from IR sensor. 3M double sided...

Adjustable PIR switch automatically activates connected 12VDC LED lights when human motion is detected. Adjustable sensitivity and light-on time. Can be set to remain on for any period of time between 30 seconds and 9 minutes. Motion detection range is within 7 meters and 160 degrees from center of PIR sensor. Male and female 5.5mm barrel power connector for connecting in-line with our CPS series power supplies. Single channel - 5 Amp maximum load. 12VDC operation. Features Sensitive passive...

Motion detectors are already a part of our lives, whether you know it or not. Your mind probably drifts towards security, when you think of them. After all, it's the situation which we're most familiar with them. And you'd be right. A lot of smart alarms rely on them, and you can make some powerful security Flows with just a motion detector and Homey. Download SBL-SR-617 Specification Sheet Specifications Battery: CR123A-3V X 1 Standby current: 34uA Alarm current: 75mA-90mA...